Generated Narrative: StructureDefinition at-emed-mr-planeintrag

NameFlagsCard.TypeDescription & Constraintsdoco
.. MedicationRequest C0..*MedicationRequestOrdering of medication for patient or group
Constraints: med-1
... Slices for extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
.... extension:effectiveDosePeriod 0..1PeriodZeitraum, in dem die Medikation eingenommen werden soll.
URL: http://hl7.org/fhir/5.0/StructureDefinition/extension-MedicationRequest.effectiveDosePeriod
.... extension:renderedDosageInstruction 0..1markdownVollständige Darstellung der Dosierungsanweisungen
URL: http://hl7.org/fhir/5.0/StructureDefinition/extension-MedicationRequest.renderedDosageInstruction
.... extension:offLabelUse 0..1(Complex)Weist darauf hin, dass der verschreibende Arzt das Medikament wissentlich für eine Indikation, Altersgruppe, Dosierung oder Verabreichungsform verschrieben hat, die nicht von den Aufsichtsbehörden zugelassen ist und in der Verschreibungsinformation für das Produkt nicht erwähnt wird.
URL: https://profiles.ihe.net/PHARM/MPD/StructureDefinition/ihe-ext-offLabel
... identifier S0..*IdentifierVerwendung im Medikationsplaneintrag zu prüfen. Geplante-Abgabe-ID (e-Med-ID) steht erst zum Zeitpunkt der Erstellung einer geplanten Abgabe (Rezeptierung) zur Verfügung.
... status S1..1codeStatus des Medikationsplaneintrags (im Standardfall active oder complete): (req) active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown -> entfernen: draft, unknown
... statusReason 0..0Grund für den aktuellen Status des Medikationsplaneintrags: (ex) https://hl7.org/fhir/R4/valueset-medicationrequest-status-reason.html. Verwendung prüfen.
... intent S1..1codeDer Medikationsplaneintrag stellt eine Anforderung und Ermächtigung zum Handeln durch den Antragsteller dar, daher ist intent immer "order". (req) proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Required Pattern: order
... category S1..1CodeableConceptKategorie damit Medikationsplaneintrag von geplanter Abgabe unterschieden werden kann (beide haben intent order)
Required Pattern: At least the following
.... coding1..*CodingCode defined by a terminology system
Fixed Value: (Complex)
..... system1..1uriIdentity of the terminology system
Fixed Value: https://fhir.hl7.at/elga/emed/r4/CodeSystem/MedicationRequestCategoryCS
..... code1..1codeSymbol in syntax defined by the system
Fixed Value: 1
... priority 0..0Priorität des Medikationsplaneintrag: (req) routine | urgent | asap | stat. Keine Verwendung in Medikationsplaneintrag.
... doNotPerform S0..1booleanGibt an, ob der Medikationsplaneintrag die Verordnung einer Medikation (und somit die Erstellung einer geplanten Abgabe) untersagt. Verwendung prüfen.
... reported[x] 0..0Gibt an, ob dieser Datensatz als sekundärer „gemeldeter” Datensatz und nicht als ursprünglicher primärer Referenzdatensatz erfasst wurde. Er kann auch die Quelle der Meldung angeben. Keine Verwendung in Medikationsplaneintrag.
... Slices for medication[x] S1..1Medication to be taken
Slice: Unordered, Open by type:$this
.... medicationCodeableConceptCodeableConcept
.... medicationReferenceReference(ELGA e-Med Medikation)
.... medication[x]:medicationCodeableConcept S0..1CodeableConceptAngabe mittels Pharmazentralnummer (PZN) aus der ASP-Liste.
Binding: https://termgit.elga.gv.at/CodeSystem/asp-liste (required)
..... coding 1..*CodingCode defined by a terminology system
.... medication[x]:medicationReference S0..1Reference(ELGA e-Med Medikation)Bei magistralen Anwendungen oder Infusionen ohne PZN.
... subject S1..1Reference(HL7® AT Core Patient Profile)Österreichischer Patient für den der Medikationsplaneintrag ausgestellt wird.
... encounter 0..0Aufenthalt/Begegnung, während dessen/der der Medikationsplaneintrag erstellt wurde. Verwendung im Medikationsplaneintrag prüfen.
... supportingInformation 0..0Zusätzliche Informationen (z. B. Größe und Gewicht des Patienten), die die Verschreibung des Medikaments unterstützen. Es müsste eigene Ressource verlinkt werden, daher keine Verwendung im Medikationsplaneintrag.
... authoredOn S1..1dateTimeDatum der Erstellung des Medikationsplaneintrags.
... requester S1..1Reference(HL7® AT Core Practitioner Profile | HL7® AT Core PractitionerRole Profile | HL7® AT Core Organization Profile)Der Arzt oder die Ärztin, die den Medikationsplaneintrag erstellt hat und für den Inhalt verantwortlich ist.
... performer 0..0Der gewünschte Ausführende der medikamentösen Behandlung (z. B. der Ausführende der Medikamentengabe). Keine Verwendung im Planeintrag.
... performerType 0..0Rollen: https://hl7.org/fhir/R4/valueset-performer-role.html. Keine Verwendung im Planeintrag.
... recorder 0..0Die Person, die den Medikationsplaneintrag im Auftrag eines GDA eingegeben hat. Keine Verwendung im Planeintrag.
... reasonCode S0..*CodeableConceptGrund für die Verordnung des Arzneimittels. Entweder Code oder Referenz (TODO: Evtl. Invariante).
.... coding 1..*CodingCode defined by a terminology system
... reasonReference S0..*Reference(Condition | Observation)Grund für die Verordnung des Arzneimittels. Entweder Code oder Referenz (TODO: Evtl. Invariante).
... instantiatesCanonical S0..1canonical()URL, die auf ein Protokoll, eine Richtlinie, eine Guideline oder eine andere Definition verweist, die von diesem Medikationsplaneintrag ganz oder teilweise eingehalten wird. TODO: Verwendung im Medikationsplaneintrag zu prüfen.
... instantiatesUri S0..1uriURL, die auf ein extern gepflegtes Protokoll, eine Richtlinie, eine Guideline oder eine andere Definition verweist, die von dieser Medikamentenanforderung ganz oder teilweise eingehalten wird. TODO: Verwendung im Medikationsplaneintrag zu prüfen.
... basedOn 0..0TODO: Verwendung im Medikationsplaneintrag zu prüfen. Vermutlich nicht möglich, da keine versionsspezifischen Referenzen verwendet werden.
... groupIdentifier 0..0TODO: Verwendung im Medikationsplaneintrag zu prüfen. Erst bei der geplanten Abgabe (Rezepterstellung) relevant. Evtl ein Verweis auf erstellte Rezepte? Würde Extension erfordern, da Kardinalität nur 0..1 zulässig
... courseOfTherapyType S0..1CodeableConceptGesamtmuster der Medikamentengabe (z.B. saisonal). Verwendung im Medikationsplaneintrag prüfen (dosageInstruction), paused soll im Status dokumentiert werden.
... insurance 0..0Keine Verwendung im Medikationsplaneintrag.
... note S0..*AnnotationZusätzliche Informationen zum Medikationsplaneintrag. TODO: zu prüfen im Kontext Korrekturvermerk
... dosageInstruction S1..*DosageAnweisungen zur Einnahme/Verabreichung des Arzneimittels. TODO: alle Elemente + R5 Extensions prüfen
... dispenseRequest 0..0Details zur geplanten Abgabe des Arzneimittels im Medikationsplan. Keine Verwendung im Medikationsplaneintrag.
... substitution S0..1BackboneElementGibt an, ob eine Substitution Teil der Abgabe sein kann/sollte/nicht sein darf. Dieser Block erläutert die Absicht des Arztes, der den Medikationsplaneintrag erstellt. Wenn nichts angegeben ist, kann eine Substitution vorgenommen werden. TODO: Zu prüfen, ob Verwendung im Medikationsplaneintrag; Dokumentation über Substitution erfolg in der Dispense-Resource. Usecase: mit welchem Medikament der Patient das Medikament ersetzen kann. Hinweis: vor allem bei OTC Medikamenten sinnvoll, da keine geplante Abgabe dazu existiert
... priorPrescription S0..1Reference(MedicationRequest)Im Falle einer Änderung wird auf den ersetzten Medikationsplaneintrag verwiesen.
... detectedIssue 0..0Bezeichnet ein tatsächliches/potenzielles klinisches Problem mit oder zwischen aktiven/vorgeschlagenen klinischen Maßnahmen für einen Patienten, z. B. Wechselwirkungen zwischen Medikamenten, doppelte Therapie, Dosierungswarnung usw. TODO: Es wäre eine eigene Ressource nötig, daher unrealistisch.
... eventHistory 0..0Referenz auf Provenance-Ressourcen, die verschiedene relevante Versionen dieser Ressource dokumentieren. TODO: Verwendung im Medikationsplaneintrag zu prüfen.

doco Documentation for this format
 <status value="draft"/> <date value="2026-02-10T17:53:58+00:00"/> <publisher value="ELGA GmbH"/> <contact> <name value="ELGA GmbH"/> <telecom> <system value="url"/> <value value="http://elga.gv.at"/> </telecom> </contact> <contact> <name value="ELGA GmbH"/> <telecom> <system value="url"/> <value value="https://elga.gv.at"/> <use value="work"/> </telecom> </contact> <description value="**Beschreibung:** Bildet einen Medikationsplaneintrag im Medikationsplan eines ELGA Teilnehmers ab ("MedicationRequest"-Ressource). Er enthält genau ein Arzneimittel und dessen Dosierung. Kann in weiterer Folge dazu dienen, eine geplante Abgabe zu erstellen. Verwendet R5 Backport Extensions."/> <fhirVersion value="4.0.1"/> <mapping> <identity value="workflow"/> <uri value="http://hl7.org/fhir/workflow"/> <name value="Workflow Pattern"/> </mapping> <mapping> <identity value="script10.6"/> <uri value="http://ncpdp.org/SCRIPT10_6"/> <name value="Mapping to NCPDP SCRIPT 10.6"/> </mapping> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <mapping> <identity value="w5"/> <uri value="http://hl7.org/fhir/fivews"/> <name value="FiveWs Pattern Mapping"/> </mapping> <mapping> <identity value="v2"/> <uri value="http://hl7.org/v2"/> <name value="HL7 v2 Mapping"/> </mapping> <kind value="resource"/> <abstract value="false"/> <type value="MedicationRequest"/> <baseDefinition value="http://hl7.org/fhir/StructureDefinition/MedicationRequest"/> <derivation value="constraint"/> <snapshot> <extension url="http://hl7.org/fhir/tools/StructureDefinition/snapshot-base-version"> <valueString value="4.0.1"/> </extension> <element id="MedicationRequest"> <path value="MedicationRequest"/> <short value="Ordering of medication for patient or group"/> <definition value="An order or request for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationRequest" rather than "MedicationPrescription" or "MedicationOrder" to generalize the use across inpatient and outpatient settings, including care plans, etc., and to harmonize with workflow patterns."/> <alias value="Prescription"/> <alias value="Order"/> <min value="0"/> <max value="*"/> <base> <path value="MedicationRequest"/> <min value="0"/> <max value="*"/> </base> <constraint> <key value="dom-2"/> <severity value="error"/> <human value="If the resource is contained in another resource, it SHALL NOT contain nested Resources"/> <expression value="contained.contained.empty()"/> <xpath value="not(parent::f:contained and f:contained)"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <key value="dom-3"/> <severity value="error"/> <human value="If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource"/> <expression value="contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()"/> <xpath value="not(exists(for $id in f:contained/*/f:id/@value return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <key value="dom-4"/> <severity value="error"/> <human value="If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated"/> <expression value="contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()"/> <xpath value="not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <key value="dom-5"/> <severity value="error"/> <human value="If a resource is contained in another resource, it SHALL NOT have a security label"/> <expression value="contained.meta.security.empty()"/> <xpath value="not(exists(f:contained/*/f:meta/f:security))"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice"> <valueBoolean value="true"/> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation"> <valueMarkdown value="When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time."/> </extension> <key value="dom-6"/> <severity value="warning"/> <human value="A resource should have narrative for robust management"/> <expression value="text.`div`.exists()"/> <xpath value="exists(f:text/h:div)"/> <source value="http://hl7.org/fhir/StructureDefinition/DomainResource"/> </constraint> <constraint> <key value="med-1"/> <severity value="error"/> <human value="Für die geplante Abgabe muss entweder CodeableConcept (PZN) oder Reference(Medication) angegeben werden – aber genau eins."/> <expression value="medicationCodeableConcept.exists() xor medicationReference.exists()"/> <source value="https://fhir.hl7.at/elga/emed/r4/StructureDefinition/at-emed-mr-planeintrag"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="Entity. Role, or Act"/> </mapping> <mapping> <identity value="workflow"/> <map value="Request"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx"/> </mapping> <mapping> <identity value="rim"/> <map value="CombinedMedicationRequest"/> </mapping> </element> <element id="MedicationRequest.id"> <path value="MedicationRequest.id"/> <short value="Logical id of this artifact"/> <definition value="The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes."/> <comment value="The only time that a resource does not have an id is when it is being submitted to the server using a create operation."/> <min value="0"/> <max value="1"/> <base> <path value="Resource.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="id"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="MedicationRequest.meta"> <path value="MedicationRequest.meta"/> <short value="Metadata about the resource"/> <definition value="The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource."/> <min value="0"/> <max value="1"/> <base> <path value="Resource.meta"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Meta"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> </element> <element id="MedicationRequest.implicitRules"> <path value="MedicationRequest.implicitRules"/> <short value="A set of rules under which this content was created"/> <definition value="A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc."/> <comment value="Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc."/> <min value="0"/> <max value="1"/> <base> <path value="Resource.implicitRules"/> <min value="0"/> <max value="1"/> </base> <type> <code value="uri"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="true"/> <isModifierReason value="This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation"/> <isSummary value="true"/> </element> <element id="MedicationRequest.language"> <path value="MedicationRequest.language"/> <short value="Language of the resource content"/> <definition value="The base language in which the resource is written."/> <comment value="Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."/> <min value="0"/> <max value="1"/> <base> <path value="Resource.language"/> <min value="0"/> <max value="1"/> </base> <type> <code value="code"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet"> <valueCanonical value="http://hl7.org/fhir/ValueSet/all-languages"/> </extension> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="Language"/> </extension> <strength value="preferred"/> <description value="A human language."/> <valueSet value="http://hl7.org/fhir/ValueSet/languages|4.0.1"/> </binding> </element> <element id="MedicationRequest.text"> <path value="MedicationRequest.text"/> <short value="Text summary of the resource, for human interpretation"/> <definition value="A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety."/> <comment value="Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later."/> <alias value="narrative"/> <alias value="html"/> <alias value="xhtml"/> <alias value="display"/> <min value="0"/> <max value="1"/> <base> <path value="DomainResource.text"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Narrative"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="Act.text?"/> </mapping> </element> <element id="MedicationRequest.contained"> <path value="MedicationRequest.contained"/> <short value="Contained, inline Resources"/> <definition value="These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope."/> <comment value="This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels."/> <alias value="inline resources"/> <alias value="anonymous resources"/> <alias value="contained resources"/> <min value="0"/> <max value="*"/> <base> <path value="DomainResource.contained"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Resource"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="MedicationRequest.extension"> <path value="MedicationRequest.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <short value="Extension"/> <definition value="An Extension"/> <min value="0"/> <max value="*"/> <base> <path value="DomainResource.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="MedicationRequest.extension:effectiveDosePeriod"> <path value="MedicationRequest.extension"/> <sliceName value="effectiveDosePeriod"/> <short value="Zeitraum, in dem die Medikation eingenommen werden soll."/> <definition value="Zeitraum, über den die Medikation eingenommen werden soll. Wenn mehrere dosageInstruction-Zeilen vorhanden sind (z. B. bei einer ausschleichenden Dosierung), entspricht dieser Zeitraum dem frühesten Startdatum und dem spätesten Enddatum der dosageInstructions."/> <min value="0"/> <max value="1"/> <base> <path value="DomainResource.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> <profile value="http://hl7.org/fhir/5.0/StructureDefinition/extension-MedicationRequest.effectiveDosePeriod"/> </type> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="MedicationRequest.extension:renderedDosageInstruction"> <path value="MedicationRequest.extension"/> <sliceName value="renderedDosageInstruction"/> <short value="Vollständige Darstellung der Dosierungsanweisungen"/> <definition value="Optional Extension Element - found in all resources."/> <min value="0"/> <max value="1"/> <base> <path value="DomainResource.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> <profile value="http://hl7.org/fhir/5.0/StructureDefinition/extension-MedicationRequest.renderedDosageInstruction"/> </type> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="MedicationRequest.extension:offLabelUse"> <path value="MedicationRequest.extension"/> <sliceName value="offLabelUse"/> <short value="Weist darauf hin, dass der verschreibende Arzt das Medikament wissentlich für eine Indikation, Altersgruppe, Dosierung oder Verabreichungsform verschrieben hat, die nicht von den Aufsichtsbehörden zugelassen ist und in der Verschreibungsinformation für das Produkt nicht erwähnt wird."/> <definition value="Indicates that the prescriber has intentionally prescribed the medication in a manner not covered by the product authorization — such as for a different indication, age group, dosage, or route of administration."/> <min value="0"/> <max value="1"/> <base> <path value="DomainResource.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> <profile value="https://profiles.ihe.net/PHARM/MPD/StructureDefinition/ihe-ext-offLabel"/> </type> <condition value="ele-1"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> </element> <element id="MedicationRequest.modifierExtension"> <path value="MedicationRequest.modifierExtension"/> <short value="Extensions that cannot be ignored"/> <definition value="May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](http://hl7.org/fhir/R4/extensibility.html#modifierExtension)."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="DomainResource.modifierExtension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="true"/> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="MedicationRequest.identifier"> <path value="MedicationRequest.identifier"/> <short value="Verwendung im Medikationsplaneintrag zu prüfen. Geplante-Abgabe-ID (e-Med-ID) steht erst zum Zeitpunkt der Erstellung einer geplanten Abgabe (Rezeptierung) zur Verfügung."/> <definition value="Identifiers associated with this medication request that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server."/> <comment value="This is a business identifier, not a resource identifier."/> <min value="0"/> <max value="*"/> <base> <path value="MedicationRequest.identifier"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Identifier"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.identifier"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Header/PrescriberOrderNumber"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.identifier"/> </mapping> <mapping> <identity value="v2"/> <map value="ORC-2-Placer Order Number / ORC-3-Filler Order Number"/> </mapping> <mapping> <identity value="rim"/> <map value=".id"/> </mapping> </element> <element id="MedicationRequest.status"> <path value="MedicationRequest.status"/> <short value="Status des Medikationsplaneintrags (im Standardfall active oder complete): (req) active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown -> entfernen: draft, unknown"/> <definition value="A code specifying the current state of the order. Generally, this will be active or completed state."/> <comment value="This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.status"/> <min value="1"/> <max value="1"/> </base> <type> <code value="code"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="true"/> <isModifierReason value="This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestStatus"/> </extension> <strength value="required"/> <description value="A coded concept specifying the state of the prescribing event. Describes the lifecycle of the prescription."/> <valueSet value="http://hl7.org/fhir/ValueSet/medicationrequest-status|4.0.1"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.status"/> </mapping> <mapping> <identity value="script10.6"/> <map value="no mapping"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.status"/> </mapping> <mapping> <identity value="rim"/> <map value=".statusCode"/> </mapping> </element> <element id="MedicationRequest.statusReason"> <path value="MedicationRequest.statusReason"/> <short value="Grund für den aktuellen Status des Medikationsplaneintrags: (ex) https://hl7.org/fhir/R4/valueset-medicationrequest-status-reason.html. Verwendung prüfen."/> <definition value="Captures the reason for the current state of the MedicationRequest."/> <comment value="This is generally only used for "exception" statuses such as "suspended" or "cancelled". The reason why the MedicationRequest was created at all is captured in reasonCode, not here."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.statusReason"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestStatusReason"/> </extension> <strength value="example"/> <description value="Identifies the reasons for a given status."/> <valueSet value="http://hl7.org/fhir/ValueSet/medicationrequest-status-reason|4.0.1"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.statusReason"/> </mapping> <mapping> <identity value="rim"/> <map value=".inboundRelationship[typeCode=SUBJ].source[classCode=CACT, moodCode=EVN].reasonCOde"/> </mapping> </element> <element id="MedicationRequest.intent"> <path value="MedicationRequest.intent"/> <short value="Der Medikationsplaneintrag stellt eine Anforderung und Ermächtigung zum Handeln durch den Antragsteller dar, daher ist intent immer "order". (req) proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option"/> <definition value="Whether the request is a proposal, plan, or an original order."/> <comment value="It is expected that the type of requester will be restricted for different stages of a MedicationRequest. For example, Proposals can be created by a patient, relatedPerson, Practitioner or Device. Plans can be created by Practitioners, Patients, RelatedPersons and Devices. Original orders can be created by a Practitioner only. An instance-order is an instantiation of a request or order and may be used to populate Medication Administration Record. This element is labeled as a modifier because the intent alters when and how the resource is actually applicable."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.intent"/> <min value="1"/> <max value="1"/> </base> <type> <code value="code"/> </type> <patternCode value="order"/> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="true"/> <isModifierReason value="This element changes the interpretation of all descriptive attributes. For example "the time the request is recommended to occur" vs. "the time the request is authorized to occur" or "who is recommended to perform the request" vs. "who is authorized to perform the request"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestIntent"/> </extension> <strength value="required"/> <description value="The kind of medication order."/> <valueSet value="http://hl7.org/fhir/ValueSet/medicationrequest-intent|4.0.1"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.intent"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.class"/> </mapping> <mapping> <identity value="rim"/> <map value=".moodCode (nuances beyond PRP/PLAN/RQO would need to be elsewhere)"/> </mapping> </element> <element id="MedicationRequest.category"> <path value="MedicationRequest.category"/> <short value="Kategorie damit Medikationsplaneintrag von geplanter Abgabe unterschieden werden kann (beide haben intent order)"/> <definition value="Indicates the type of medication request (for example, where the medication is expected to be consumed or administered (i.e. inpatient or outpatient))."/> <comment value="The category can be used to include where the medication is expected to be consumed or other types of requests."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.category"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <patternCodeableConcept> <coding> <system value="https://fhir.hl7.at/elga/emed/r4/CodeSystem/MedicationRequestCategoryCS"/> <code value="1"/> </coding> </patternCodeableConcept> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestCategory"/> </extension> <strength value="example"/> <description value="A coded concept identifying the category of medication request. For example, where the medication is to be consumed or administered, or the type of medication treatment."/> <valueSet value="http://hl7.org/fhir/ValueSet/medicationrequest-category|4.0.1"/> </binding> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/Directions or Message/Body/NewRx/MedicationPrescribed/StructuredSIG"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.class"/> </mapping> <mapping> <identity value="rim"/> <map value=".inboundRelationship[typeCode=COMP].source[classCode=OBS, moodCode=EVN, code="type of medication usage"].value"/> </mapping> </element> <element id="MedicationRequest.priority"> <path value="MedicationRequest.priority"/> <short value="Priorität des Medikationsplaneintrag: (req) routine | urgent | asap | stat. Keine Verwendung in Medikationsplaneintrag."/> <definition value="Indicates how quickly the Medication Request should be addressed with respect to other requests."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.priority"/> <min value="0"/> <max value="1"/> </base> <type> <code value="code"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestPriority"/> </extension> <strength value="required"/> <description value="Identifies the level of importance to be assigned to actioning the request."/> <valueSet value="http://hl7.org/fhir/ValueSet/request-priority|4.0.1"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.priority"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.grade"/> </mapping> <mapping> <identity value="rim"/> <map value=".priorityCode"/> </mapping> </element> <element id="MedicationRequest.doNotPerform"> <path value="MedicationRequest.doNotPerform"/> <short value="Gibt an, ob der Medikationsplaneintrag die Verordnung einer Medikation (und somit die Erstellung einer geplanten Abgabe) untersagt. Verwendung prüfen."/> <definition value="If true indicates that the provider is asking for the medication request not to occur."/> <comment value="If do not perform is not specified, the request is a positive request e.g. "do perform"."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.doNotPerform"/> <min value="0"/> <max value="1"/> </base> <type> <code value="boolean"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="true"/> <isModifierReason value="This element is labeled as a modifier because this element negates the request to occur (ie, this is a request for the medication not to be ordered or prescribed, etc)"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="SubstanceAdministration.actionNegationInd"/> </mapping> </element> <element id="MedicationRequest.reported[x]"> <path value="MedicationRequest.reported[x]"/> <short value="Gibt an, ob dieser Datensatz als sekundärer „gemeldeter” Datensatz und nicht als ursprünglicher primärer Referenzdatensatz erfasst wurde. Er kann auch die Quelle der Meldung angeben. Keine Verwendung in Medikationsplaneintrag."/> <definition value="Indicates if this record was captured as a secondary 'reported' record rather than as an original primary source-of-truth record. It may also indicate the source of the report."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.reported[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="boolean"/> </type> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value=".participation[typeCode=INF].role"/> </mapping> </element> <element id="MedicationRequest.medication[x]"> <path value="MedicationRequest.medication[x]"/> <slicing> <discriminator> <type value="type"/> <path value="$this"/> </discriminator> <ordered value="false"/> <rules value="closed"/> </slicing> <short value="Medication to be taken"/> <definition value="Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications."/> <comment value="If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.medication[x]"/> <min value="1"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <type> <code value="Reference"/> <targetProfile value="https://fhir.hl7.at/elga/emed/r4/StructureDefinition/at-emed-medication"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationCode"/> </extension> <strength value="example"/> <description value="A coded concept identifying substance or product that can be ordered."/> <valueSet value="http://hl7.org/fhir/ValueSet/medication-codes|4.0.1"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.code"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed Medication.code.coding.code = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCode Medication.code.coding.system = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCodeQualifier Medication.code.coding.display = Message/Body/NewRx/MedicationPrescribed/DrugDescription"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.what[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="RXE-2-Give Code / RXO-1-Requested Give Code / RXC-2-Component Code"/> </mapping> <mapping> <identity value="rim"/> <map value="consumable.administrableMedication"/> </mapping> </element> <element id="MedicationRequest.medication[x]:medicationCodeableConcept"> <path value="MedicationRequest.medication[x]"/> <sliceName value="medicationCodeableConcept"/> <short value="Angabe mittels Pharmazentralnummer (PZN) aus der ASP-Liste."/> <definition value="Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications."/> <comment value="If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.medication[x]"/> <min value="1"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <binding> <strength value="required"/> <valueSet value="https://termgit.elga.gv.at/CodeSystem/asp-liste"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.code"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed Medication.code.coding.code = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCode Medication.code.coding.system = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCodeQualifier Medication.code.coding.display = Message/Body/NewRx/MedicationPrescribed/DrugDescription"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.what[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="RXE-2-Give Code / RXO-1-Requested Give Code / RXC-2-Component Code"/> </mapping> <mapping> <identity value="rim"/> <map value="consumable.administrableMedication"/> </mapping> </element> <element id="MedicationRequest.medication[x]:medicationCodeableConcept.id"> <path value="MedicationRequest.medication[x].id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.medication[x]:medicationCodeableConcept.extension"> <path value="MedicationRequest.medication[x].extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.medication[x]:medicationCodeableConcept.coding"> <path value="MedicationRequest.medication[x].coding"/> <short value="Code defined by a terminology system"/> <definition value="A reference to a code defined by a terminology system."/> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true."/> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems."/> <min value="1"/> <max value="*"/> <base> <path value="CodeableConcept.coding"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Coding"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="v2"/> <map value="C*E.1-8, C*E.10-22"/> </mapping> <mapping> <identity value="rim"/> <map value="union(., ./translation)"/> </mapping> <mapping> <identity value="orim"/> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding"/> </mapping> </element> <element id="MedicationRequest.medication[x]:medicationCodeableConcept.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true"/> </extension> <path value="MedicationRequest.medication[x].text"/> <short value="Plain text representation of the concept"/> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user."/> <comment value="Very often the text is the same as a displayName of one of the codings."/> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source."/> <min value="0"/> <max value="1"/> <base> <path value="CodeableConcept.text"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="v2"/> <map value="C*E.9. But note many systems use C*E.2 for this"/> </mapping> <mapping> <identity value="rim"/> <map value="./originalText[mediaType/code="text/plain"]/data"/> </mapping> <mapping> <identity value="orim"/> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText"/> </mapping> </element> <element id="MedicationRequest.medication[x]:medicationReference"> <path value="MedicationRequest.medication[x]"/> <sliceName value="medicationReference"/> <short value="Bei magistralen Anwendungen oder Infusionen ohne PZN."/> <definition value="Identifies the medication being requested. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications."/> <comment value="If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the Medication resource is recommended. For example, if you require form or lot number or if the medication is compounded or extemporaneously prepared, then you must reference the Medication resource."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.medication[x]"/> <min value="1"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="https://fhir.hl7.at/elga/emed/r4/StructureDefinition/at-emed-medication"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Request.code"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed Medication.code.coding.code = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCode Medication.code.coding.system = Message/Body/NewRx/MedicationPrescribed/DrugCoded/ProductCodeQualifier Medication.code.coding.display = Message/Body/NewRx/MedicationPrescribed/DrugDescription"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.what[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="RXE-2-Give Code / RXO-1-Requested Give Code / RXC-2-Component Code"/> </mapping> <mapping> <identity value="rim"/> <map value="consumable.administrableMedication"/> </mapping> </element> <element id="MedicationRequest.subject"> <path value="MedicationRequest.subject"/> <short value="Österreichischer Patient für den der Medikationsplaneintrag ausgestellt wird."/> <definition value="A link to a resource representing the person or set of individuals to whom the medication will be given."/> <comment value="The subject on a medication request is mandatory. For the secondary use case where the actual subject is not provided, there still must be an anonymized subject specified."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.subject"/> <min value="1"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-patient"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Request.subject"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/Patient (need detail to link to specific patient … Patient.Identification in SCRIPT)"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.subject[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="PID-3-Patient ID List"/> </mapping> <mapping> <identity value="rim"/> <map value=".participation[typeCode=AUT].role"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.subject"/> </mapping> </element> <element id="MedicationRequest.encounter"> <path value="MedicationRequest.encounter"/> <short value="Aufenthalt/Begegnung, während dessen/der der Medikationsplaneintrag erstellt wurde. Verwendung im Medikationsplaneintrag prüfen."/> <definition value="The Encounter during which this [x] was created or to which the creation of this record is tightly associated."/> <comment value="This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter." If there is a need to link to episodes of care they will be handled with an extension."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.encounter"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Encounter|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.context"/> </mapping> <mapping> <identity value="script10.6"/> <map value="no mapping"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.context"/> </mapping> <mapping> <identity value="v2"/> <map value="PV1-19-Visit Number"/> </mapping> <mapping> <identity value="rim"/> <map value=".inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN, code="type of encounter or episode"]"/> </mapping> </element> <element id="MedicationRequest.supportingInformation"> <path value="MedicationRequest.supportingInformation"/> <short value="Zusätzliche Informationen (z. B. Größe und Gewicht des Patienten), die die Verschreibung des Medikaments unterstützen. Es müsste eigene Ressource verlinkt werden, daher keine Verwendung im Medikationsplaneintrag."/> <definition value="Include additional information (for example, patient height and weight) that supports the ordering of the medication."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.supportingInformation"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Resource|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.supportingInfo"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.context"/> </mapping> <mapping> <identity value="rim"/> <map value=".outboundRelationship[typeCode=PERT].target[A_SupportingClinicalStatement CMET minimal with many different choices of classCodes(ORG, ENC, PROC, SPLY, SBADM, OBS) and each of the act class codes draws from one or more of the following moodCodes (EVN, DEF, INT PRMS, RQO, PRP, APT, ARQ, GOL)]"/> </mapping> </element> <element id="MedicationRequest.authoredOn"> <path value="MedicationRequest.authoredOn"/> <short value="Datum der Erstellung des Medikationsplaneintrags."/> <definition value="The date (and perhaps time) when the prescription was initially written or authored on."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.authoredOn"/> <min value="0"/> <max value="1"/> </base> <type> <code value="dateTime"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Request.authoredOn"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/WrittenDate"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.recorded"/> </mapping> <mapping> <identity value="v2"/> <map value="RXE-32-Original Order Date/Time / ORC-9-Date/Time of Transaction"/> </mapping> <mapping> <identity value="rim"/> <map value="author.time"/> </mapping> </element> <element id="MedicationRequest.requester"> <path value="MedicationRequest.requester"/> <short value="Der Arzt oder die Ärztin, die den Medikationsplaneintrag erstellt hat und für den Inhalt verantwortlich ist."/> <definition value="The individual, organization, or device that initiated the request and has responsibility for its activation."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.requester"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-practitioner"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-practitionerRole"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-organization"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Request.requester"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.author"/> </mapping> <mapping> <identity value="rim"/> <map value=".participation[typeCode=AUT].role"/> </mapping> </element> <element id="MedicationRequest.performer"> <path value="MedicationRequest.performer"/> <short value="Der gewünschte Ausführende der medikamentösen Behandlung (z. B. der Ausführende der Medikamentengabe). Keine Verwendung im Planeintrag."/> <definition value="The specified desired performer of the medication treatment (e.g. the performer of the medication administration)."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.performer"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Patient|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Device|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/RelatedPerson|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/CareTeam|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.performer"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.actor"/> </mapping> <mapping> <identity value="rim"/> <map value=".participation[typeCode=PRF].role[scoper.determinerCode=INSTANCE]"/> </mapping> </element> <element id="MedicationRequest.performerType"> <path value="MedicationRequest.performerType"/> <short value="Rollen: https://hl7.org/fhir/R4/valueset-performer-role.html. Keine Verwendung im Planeintrag."/> <definition value="Indicates the type of performer of the administration of the medication."/> <comment value="If specified without indicating a performer, this indicates that the performer must be of the specified type. If specified with a performer then it indicates the requirements of the performer if the designated performer is not available."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.performerType"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestPerformerType"/> </extension> <strength value="example"/> <description value="Identifies the type of individual that is desired to administer the medication."/> <valueSet value="http://hl7.org/fhir/ValueSet/performer-role|4.0.1"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.performerType"/> </mapping> <mapping> <identity value="rim"/> <map value=".participation[typeCode=PRF].role[scoper.determinerCode=KIND].code"/> </mapping> </element> <element id="MedicationRequest.recorder"> <path value="MedicationRequest.recorder"/> <short value="Die Person, die den Medikationsplaneintrag im Auftrag eines GDA eingegeben hat. Keine Verwendung im Planeintrag."/> <definition value="The person who entered the order on behalf of another individual for example in the case of a verbal or a telephone order."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.recorder"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Practitioner|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/PractitionerRole|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="w5"/> <map value="FiveWs.who"/> </mapping> <mapping> <identity value="rim"/> <map value=".participation[typeCode=TRANS].role[classCode=ASSIGNED].code (HealthcareProviderType)"/> </mapping> </element> <element id="MedicationRequest.reasonCode"> <path value="MedicationRequest.reasonCode"/> <short value="Grund für die Verordnung des Arzneimittels. Entweder Code oder Referenz (TODO: Evtl. Invariante)."/> <definition value="The reason or the indication for ordering or not ordering the medication."/> <comment value="This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonReference."/> <min value="0"/> <max value="*"/> <base> <path value="MedicationRequest.reasonCode"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestReason"/> </extension> <strength value="example"/> <description value="A coded concept indicating why the medication was ordered."/> <valueSet value="http://hl7.org/fhir/ValueSet/condition-code|4.0.1"/> </binding> <mapping> <identity value="workflow"/> <map value="Request.reasonCode"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/Diagnosis/Primary/Value"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.why[x]"/> </mapping> <mapping> <identity value="v2"/> <map value="ORC-16-Order Control Code Reason /RXE-27-Give Indication/RXO-20-Indication / RXD-21-Indication / RXG-22-Indication / RXA-19-Indication"/> </mapping> <mapping> <identity value="rim"/> <map value="reason.observation.reasonCode"/> </mapping> </element> <element id="MedicationRequest.reasonCode.id"> <path value="MedicationRequest.reasonCode.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.reasonCode.extension"> <path value="MedicationRequest.reasonCode.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <description value="Extensions are always sliced by (at least) url"/> <rules value="open"/> </slicing> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.reasonCode.coding"> <path value="MedicationRequest.reasonCode.coding"/> <short value="Code defined by a terminology system"/> <definition value="A reference to a code defined by a terminology system."/> <comment value="Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true."/> <requirements value="Allows for alternative encodings within a code system, and translations to other code systems."/> <min value="1"/> <max value="*"/> <base> <path value="CodeableConcept.coding"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Coding"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="v2"/> <map value="C*E.1-8, C*E.10-22"/> </mapping> <mapping> <identity value="rim"/> <map value="union(., ./translation)"/> </mapping> <mapping> <identity value="orim"/> <map value="fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding"/> </mapping> </element> <element id="MedicationRequest.reasonCode.text"> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable"> <valueBoolean value="true"/> </extension> <path value="MedicationRequest.reasonCode.text"/> <short value="Plain text representation of the concept"/> <definition value="A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user."/> <comment value="Very often the text is the same as a displayName of one of the codings."/> <requirements value="The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source."/> <min value="0"/> <max value="1"/> <base> <path value="CodeableConcept.text"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="v2"/> <map value="C*E.9. But note many systems use C*E.2 for this"/> </mapping> <mapping> <identity value="rim"/> <map value="./originalText[mediaType/code="text/plain"]/data"/> </mapping> <mapping> <identity value="orim"/> <map value="fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText"/> </mapping> </element> <element id="MedicationRequest.reasonReference"> <path value="MedicationRequest.reasonReference"/> <short value="Grund für die Verordnung des Arzneimittels. Entweder Code oder Referenz (TODO: Evtl. Invariante)."/> <definition value="Condition or observation that supports why the medication was ordered."/> <comment value="This is a reference to a condition or observation that is the reason for the medication order. If only a code exists, use reasonCode."/> <min value="0"/> <max value="*"/> <base> <path value="MedicationRequest.reasonReference"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Condition|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Observation|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.reasonReference"/> </mapping> <mapping> <identity value="script10.6"/> <map value="no mapping"/> </mapping> <mapping> <identity value="w5"/> <map value="FiveWs.why[x]"/> </mapping> <mapping> <identity value="rim"/> <map value="reason.observation[code=ASSERTION].value"/> </mapping> </element> <element id="MedicationRequest.instantiatesCanonical"> <path value="MedicationRequest.instantiatesCanonical"/> <short value="URL, die auf ein Protokoll, eine Richtlinie, eine Guideline oder eine andere Definition verweist, die von diesem Medikationsplaneintrag ganz oder teilweise eingehalten wird. TODO: Verwendung im Medikationsplaneintrag zu prüfen."/> <definition value="The URL pointing to a protocol, guideline, orderset, or other definition that is adhered to in whole or in part by this MedicationRequest."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.instantiatesCanonical"/> <min value="0"/> <max value="*"/> </base> <type> <code value="canonical"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Request.instantiates"/> </mapping> <mapping> <identity value="rim"/> <map value=".outboundRelationship[typeCode=DEFN].target"/> </mapping> </element> <element id="MedicationRequest.instantiatesUri"> <path value="MedicationRequest.instantiatesUri"/> <short value="URL, die auf ein extern gepflegtes Protokoll, eine Richtlinie, eine Guideline oder eine andere Definition verweist, die von dieser Medikamentenanforderung ganz oder teilweise eingehalten wird. TODO: Verwendung im Medikationsplaneintrag zu prüfen."/> <definition value="The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this MedicationRequest."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.instantiatesUri"/> <min value="0"/> <max value="*"/> </base> <type> <code value="uri"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value=".outboundRelationship[typeCode=DEFN].target"/> </mapping> </element> <element id="MedicationRequest.basedOn"> <path value="MedicationRequest.basedOn"/> <short value="TODO: Verwendung im Medikationsplaneintrag zu prüfen. Vermutlich nicht möglich, da keine versionsspezifischen Referenzen verwendet werden."/> <definition value="A plan or request that is fulfilled in whole or in part by this medication request."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.basedOn"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/CarePlan|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/MedicationRequest|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ServiceRequest|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ImmunizationRecommendation|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Request.basedOn"/> </mapping> <mapping> <identity value="rim"/> <map value=".outboundRelationship[typeCode=FLFS].target[classCode=SBADM or PROC or PCPR or OBS, moodCode=RQO orPLAN or PRP]"/> </mapping> </element> <element id="MedicationRequest.groupIdentifier"> <path value="MedicationRequest.groupIdentifier"/> <short value="TODO: Verwendung im Medikationsplaneintrag zu prüfen. Erst bei der geplanten Abgabe (Rezepterstellung) relevant. Evtl ein Verweis auf erstellte Rezepte? Würde Extension erfordern, da Kardinalität nur 0..1 zulässig"/> <definition value="A shared identifier common to all requests that were authorized more or less simultaneously by a single author, representing the identifier of the requisition or prescription."/> <requirements value="Requests are linked either by a "basedOn" relationship (i.e. one request is fulfilling another) or by having a common requisition. Requests that are part of the same requisition are generally treated independently from the perspective of changing their state or maintaining them after initial creation."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.groupIdentifier"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Identifier"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="true"/> <mapping> <identity value="workflow"/> <map value="Request.groupIdentifier"/> </mapping> <mapping> <identity value="rim"/> <map value=".outboundRelationship(typeCode=COMP].target[classCode=SBADM, moodCode=INT].id"/> </mapping> </element> <element id="MedicationRequest.courseOfTherapyType"> <path value="MedicationRequest.courseOfTherapyType"/> <short value="Gesamtmuster der Medikamentengabe (z.B. saisonal). Verwendung im Medikationsplaneintrag prüfen (dosageInstruction), paused soll im Status dokumentiert werden."/> <definition value="The description of the overall patte3rn of the administration of the medication to the patient."/> <comment value="This attribute should not be confused with the protocol of the medication."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.courseOfTherapyType"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestCourseOfTherapy"/> </extension> <strength value="example"/> <description value="Identifies the overall pattern of medication administratio."/> <valueSet value="http://hl7.org/fhir/ValueSet/medicationrequest-course-of-therapy|4.0.1"/> </binding> <mapping> <identity value="rim"/> <map value="Act.code where classCode = LIST and moodCode = EVN"/> </mapping> </element> <element id="MedicationRequest.insurance"> <path value="MedicationRequest.insurance"/> <short value="Keine Verwendung im Medikationsplaneintrag."/> <definition value="Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be required for delivering the requested service."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.insurance"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Coverage|4.0.1"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/ClaimResponse|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.insurance"/> </mapping> <mapping> <identity value="rim"/> <map value=".outboundRelationship[typeCode=COVBY].target"/> </mapping> </element> <element id="MedicationRequest.note"> <path value="MedicationRequest.note"/> <short value="Zusätzliche Informationen zum Medikationsplaneintrag. TODO: zu prüfen im Kontext Korrekturvermerk"/> <definition value="Extra information about the prescription that could not be conveyed by the other attributes."/> <min value="0"/> <max value="*"/> <base> <path value="MedicationRequest.note"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Annotation"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.note"/> </mapping> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/Note"/> </mapping> <mapping> <identity value="rim"/> <map value=".inboundRelationship[typeCode=SUBJ]/source[classCode=OBS,moodCode=EVN,code="annotation"].value"/> </mapping> </element> <element id="MedicationRequest.dosageInstruction"> <path value="MedicationRequest.dosageInstruction"/> <short value="Anweisungen zur Einnahme/Verabreichung des Arzneimittels. TODO: alle Elemente + R5 Extensions prüfen"/> <definition value="Indicates how the medication is to be used by the patient."/> <comment value="There are examples where a medication request may include the option of an oral dose or an Intravenous or Intramuscular dose. For example, "Ondansetron 8mg orally or IV twice a day as needed for nausea" or "Compazine® (prochlorperazine) 5-10mg PO or 25mg PR bid prn nausea or vomiting". In these cases, two medication requests would be created that could be grouped together. The decision on which dose and route of administration to use is based on the patient's condition at the time the dose is needed."/> <min value="1"/> <max value="*"/> <base> <path value="MedicationRequest.dosageInstruction"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Dosage"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.occurrence[x]"/> </mapping> <mapping> <identity value="rim"/> <map value="see dosageInstruction mapping"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest"> <path value="MedicationRequest.dispenseRequest"/> <short value="Details zur geplanten Abgabe des Arzneimittels im Medikationsplan. Keine Verwendung im Medikationsplaneintrag."/> <definition value="Indicates the specific details for the dispense or medication supply part of a medication request (also known as a Medication Prescription or Medication Order). Note that this information is not always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.dispenseRequest"/> <min value="0"/> <max value="1"/> </base> <type> <code value="BackboneElement"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/ExpirationDate"/> </mapping> <mapping> <identity value="rim"/> <map value="component.supplyEvent"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.id"> <path value="MedicationRequest.dispenseRequest.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.extension"> <path value="MedicationRequest.dispenseRequest.extension"/> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.modifierExtension"> <path value="MedicationRequest.dispenseRequest.modifierExtension"/> <short value="Extensions that cannot be ignored even if unrecognized"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](http://hl7.org/fhir/R4/extensibility.html#modifierExtension)."/> <alias value="extensions"/> <alias value="user content"/> <alias value="modifiers"/> <min value="0"/> <max value="*"/> <base> <path value="BackboneElement.modifierExtension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="true"/> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.initialFill"> <path value="MedicationRequest.dispenseRequest.initialFill"/> <short value="First fill details"/> <definition value="Indicates the quantity or duration for the first dispense of the medication."/> <comment value="If populating this element, either the quantity or the duration must be included."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.initialFill"/> <min value="0"/> <max value="1"/> </base> <type> <code value="BackboneElement"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="SubstanceAdministration -> ActRelationship[sequenceNumber = '1'] -> Supply"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.initialFill.id"> <path value="MedicationRequest.dispenseRequest.initialFill.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.initialFill.extension"> <path value="MedicationRequest.dispenseRequest.initialFill.extension"/> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.initialFill.modifierExtension"> <path value="MedicationRequest.dispenseRequest.initialFill.modifierExtension"/> <short value="Extensions that cannot be ignored even if unrecognized"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](http://hl7.org/fhir/R4/extensibility.html#modifierExtension)."/> <alias value="extensions"/> <alias value="user content"/> <alias value="modifiers"/> <min value="0"/> <max value="*"/> <base> <path value="BackboneElement.modifierExtension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="true"/> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.initialFill.quantity"> <path value="MedicationRequest.dispenseRequest.initialFill.quantity"/> <short value="First fill quantity"/> <definition value="The amount or quantity to provide as part of the first dispense."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.initialFill.quantity"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="Supply.quantity[moodCode=RQO]"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.initialFill.duration"> <path value="MedicationRequest.dispenseRequest.initialFill.duration"/> <short value="First fill duration"/> <definition value="The length of time that the first dispense is expected to last."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.initialFill.duration"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Duration"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="Supply.effectivetime[moodCode=RQO]"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.dispenseInterval"> <path value="MedicationRequest.dispenseRequest.dispenseInterval"/> <short value="Minimum period of time between dispenses"/> <definition value="The minimum period of time that must occur between dispenses of the medication."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.dispenseInterval"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Duration"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="Supply.effectivetime[moodCode=RQO]"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.validityPeriod"> <path value="MedicationRequest.dispenseRequest.validityPeriod"/> <short value="Time period supply is authorized for"/> <definition value="This indicates the validity period of a prescription (stale dating the Prescription)."/> <comment value="It reflects the prescribers' perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations."/> <requirements value="Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.validityPeriod"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Period"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/Refills"/> </mapping> <mapping> <identity value="rim"/> <map value="effectiveTime"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.numberOfRepeatsAllowed"> <path value="MedicationRequest.dispenseRequest.numberOfRepeatsAllowed"/> <short value="Number of refills authorized"/> <definition value="An integer indicating the number of times, in addition to the original dispense, (aka refills or repeats) that the patient can receive the prescribed medication. Usage Notes: This integer does not include the original order dispense. This means that if an order indicates dispense 30 tablets plus "3 repeats", then the order can be dispensed a total of 4 times and the patient can receive a total of 120 tablets. A prescriber may explicitly say that zero refills are permitted after the initial dispense."/> <comment value="If displaying "number of authorized fills", add 1 to this number."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.numberOfRepeatsAllowed"/> <min value="0"/> <max value="1"/> </base> <type> <code value="unsignedInt"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/Quantity"/> </mapping> <mapping> <identity value="v2"/> <map value="RXE-12-Number of Refills"/> </mapping> <mapping> <identity value="rim"/> <map value="repeatNumber"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.quantity"> <path value="MedicationRequest.dispenseRequest.quantity"/> <short value="Amount of medication to supply per dispense"/> <definition value="The amount that is to be dispensed for one fill."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.quantity"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> <profile value="http://hl7.org/fhir/StructureDefinition/SimpleQuantity|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/DaysSupply"/> </mapping> <mapping> <identity value="v2"/> <map value="RXD-4-Actual Dispense Amount / RXD-5.1-Actual Dispense Units.code / RXD-5.3-Actual Dispense Units.name of coding system"/> </mapping> <mapping> <identity value="rim"/> <map value="quantity"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.expectedSupplyDuration"> <path value="MedicationRequest.dispenseRequest.expectedSupplyDuration"/> <short value="Number of days supply per dispense"/> <definition value="Identifies the period time over which the supplied product is expected to be used, or the length of time the dispense is expected to last."/> <comment value="In some situations, this attribute may be used instead of quantity to identify the amount supplied by how long it is expected to last, rather than the physical quantity issued, e.g. 90 days supply of medication (based on an ordered dosage). When possible, it is always better to specify quantity, as this tends to be more precise. expectedSupplyDuration will always be an estimate that can be influenced by external factors."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.expectedSupplyDuration"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Duration"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="script10.6"/> <map value="Message/Body/NewRx/MedicationPrescribed/Substitutions"/> </mapping> <mapping> <identity value="rim"/> <map value="expectedUseTime"/> </mapping> </element> <element id="MedicationRequest.dispenseRequest.performer"> <path value="MedicationRequest.dispenseRequest.performer"/> <short value="Intended dispenser"/> <definition value="Indicates the intended dispensing Organization specified by the prescriber."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.dispenseRequest.performer"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Organization|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="w5"/> <map value="FiveWs.who"/> </mapping> <mapping> <identity value="rim"/> <map value=".outboundRelationship[typeCode=COMP].target[classCode=SPLY, moodCode=RQO] .participation[typeCode=PRF].role[scoper.determinerCode=INSTANCE]"/> </mapping> </element> <element id="MedicationRequest.substitution"> <path value="MedicationRequest.substitution"/> <short value="Gibt an, ob eine Substitution Teil der Abgabe sein kann/sollte/nicht sein darf. Dieser Block erläutert die Absicht des Arztes, der den Medikationsplaneintrag erstellt. Wenn nichts angegeben ist, kann eine Substitution vorgenommen werden. TODO: Zu prüfen, ob Verwendung im Medikationsplaneintrag; Dokumentation über Substitution erfolg in der Dispense-Resource. Usecase: mit welchem Medikament der Patient das Medikament ersetzen kann. Hinweis: vor allem bei OTC Medikamenten sinnvoll, da keine geplante Abgabe dazu existiert"/> <definition value="Indicates whether or not substitution can or should be part of the dispense. In some cases, substitution must happen, in other cases substitution must not happen. This block explains the prescriber's intent. If nothing is specified substitution may be done."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.substitution"/> <min value="0"/> <max value="1"/> </base> <type> <code value="BackboneElement"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="script10.6"/> <map value="specific values within Message/Body/NewRx/MedicationPrescribed/Substitutions"/> </mapping> <mapping> <identity value="rim"/> <map value="subjectOf.substitutionPersmission"/> </mapping> </element> <element id="MedicationRequest.substitution.id"> <path value="MedicationRequest.substitution.id"/> <representation value="xmlAttr"/> <short value="Unique id for inter-element referencing"/> <definition value="Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces."/> <min value="0"/> <max value="1"/> <base> <path value="Element.id"/> <min value="0"/> <max value="1"/> </base> <type> <extension url="http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type"> <valueUrl value="string"/> </extension> <code value="http://hl7.org/fhirpath/System.String"/> </type> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.substitution.extension"> <path value="MedicationRequest.substitution.extension"/> <short value="Additional content defined by implementations"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <alias value="extensions"/> <alias value="user content"/> <min value="0"/> <max value="*"/> <base> <path value="Element.extension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="MedicationRequest.substitution.modifierExtension"> <path value="MedicationRequest.substitution.modifierExtension"/> <short value="Extensions that cannot be ignored even if unrecognized"/> <definition value="May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself)."/> <comment value="There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone."/> <requirements value="Modifier extensions allow for extensions that *cannot* be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the [definition of modifier extensions](http://hl7.org/fhir/R4/extensibility.html#modifierExtension)."/> <alias value="extensions"/> <alias value="user content"/> <alias value="modifiers"/> <min value="0"/> <max value="*"/> <base> <path value="BackboneElement.modifierExtension"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Extension"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <constraint> <key value="ext-1"/> <severity value="error"/> <human value="Must have either extensions or value[x], not both"/> <expression value="extension.exists() != value.exists()"/> <xpath value="exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])"/> <source value="http://hl7.org/fhir/StructureDefinition/Extension"/> </constraint> <isModifier value="true"/> <isModifierReason value="Modifier extensions are expected to modify the meaning or interpretation of the element that contains them"/> <isSummary value="true"/> <mapping> <identity value="rim"/> <map value="N/A"/> </mapping> </element> <element id="MedicationRequest.substitution.allowed[x]"> <path value="MedicationRequest.substitution.allowed[x]"/> <short value="Whether substitution is allowed or not"/> <definition value="True if the prescriber allows a different drug to be dispensed from what was prescribed."/> <comment value="This element is labeled as a modifier because whether substitution is allow or not, it cannot be ignored."/> <min value="1"/> <max value="1"/> <base> <path value="MedicationRequest.substitution.allowed[x]"/> <min value="1"/> <max value="1"/> </base> <type> <code value="boolean"/> </type> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationRequestSubstitution"/> </extension> <strength value="example"/> <description value="Identifies the type of substitution allowed."/> <valueSet value="http://terminology.hl7.org/ValueSet/v3-ActSubstanceAdminSubstitutionCode"/> </binding> <mapping> <identity value="script10.6"/> <map value="specific values within Message/Body/NewRx/MedicationPrescribed/Substitutions"/> </mapping> <mapping> <identity value="v2"/> <map value="RXO-9-Allow Substitutions / RXE-9-Substitution Status"/> </mapping> <mapping> <identity value="rim"/> <map value="code"/> </mapping> </element> <element id="MedicationRequest.substitution.reason"> <path value="MedicationRequest.substitution.reason"/> <short value="Why should (not) substitution be made"/> <definition value="Indicates the reason for the substitution, or why substitution must or must not be performed."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.substitution.reason"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <binding> <extension url="http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName"> <valueString value="MedicationIntendedSubstitutionReason"/> </extension> <strength value="example"/> <description value="A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed."/> <valueSet value="http://terminology.hl7.org/ValueSet/v3-SubstanceAdminSubstitutionReason"/> </binding> <mapping> <identity value="script10.6"/> <map value="not mapped"/> </mapping> <mapping> <identity value="v2"/> <map value="RXE-9 Substition status"/> </mapping> <mapping> <identity value="rim"/> <map value="reasonCode"/> </mapping> </element> <element id="MedicationRequest.priorPrescription"> <path value="MedicationRequest.priorPrescription"/> <short value="Im Falle einer Änderung wird auf den ersetzten Medikationsplaneintrag verwiesen."/> <definition value="A link to a resource representing an earlier order related order or prescription."/> <min value="0"/> <max value="1"/> <base> <path value="MedicationRequest.priorPrescription"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/MedicationRequest|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <mustSupport value="true"/> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.replaces"/> </mapping> <mapping> <identity value="script10.6"/> <map value="not mapped"/> </mapping> <mapping> <identity value="rim"/> <map value=".outboundRelationship[typeCode=?RPLC or ?SUCC]/target[classCode=SBADM,moodCode=RQO]"/> </mapping> </element> <element id="MedicationRequest.detectedIssue"> <path value="MedicationRequest.detectedIssue"/> <short value="Bezeichnet ein tatsächliches/potenzielles klinisches Problem mit oder zwischen aktiven/vorgeschlagenen klinischen Maßnahmen für einen Patienten, z. B. Wechselwirkungen zwischen Medikamenten, doppelte Therapie, Dosierungswarnung usw. TODO: Es wäre eine eigene Ressource nötig, daher unrealistisch."/> <definition value="Indicates an actual or potential clinical issue with or between one or more active or proposed clinical actions for a patient; e.g. Drug-drug interaction, duplicate therapy, dosage alert etc."/> <comment value="This element can include a detected issue that has been identified either by a decision support system or by a clinician and may include information on the steps that were taken to address the issue."/> <alias value="Contraindication"/> <alias value="Drug Utilization Review (DUR)"/> <alias value="Alert"/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.detectedIssue"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/DetectedIssue|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="rim"/> <map value=".inboundRelationship[typeCode=SUBJ]/source[classCode=ALRT,moodCode=EVN].value"/> </mapping> </element> <element id="MedicationRequest.eventHistory"> <path value="MedicationRequest.eventHistory"/> <short value="Referenz auf Provenance-Ressourcen, die verschiedene relevante Versionen dieser Ressource dokumentieren. TODO: Verwendung im Medikationsplaneintrag zu prüfen."/> <definition value="Links to Provenance records for past versions of this resource or fulfilling request or event resources that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the resource."/> <comment value="This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.)."/> <min value="0"/> <max value="0"/> <base> <path value="MedicationRequest.eventHistory"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Reference"/> <targetProfile value="http://hl7.org/fhir/StructureDefinition/Provenance|4.0.1"/> </type> <constraint> <key value="ele-1"/> <severity value="error"/> <human value="All FHIR elements must have a @value or children"/> <expression value="hasValue() or (children().count() > id.count())"/> <xpath value="@value|f:*|h:div"/> <source value="http://hl7.org/fhir/StructureDefinition/Element"/> </constraint> <isModifier value="false"/> <isSummary value="false"/> <mapping> <identity value="workflow"/> <map value="Request.relevantHistory"/> </mapping> <mapping> <identity value="rim"/> <map value=".inboundRelationship(typeCode=SUBJ].source[classCode=CACT, moodCode=EVN]"/> </mapping> </element> </snapshot> <differential> <element id="MedicationRequest"> <path value="MedicationRequest"/> <constraint> <key value="med-1"/> <severity value="error"/> <human value="Für die geplante Abgabe muss entweder CodeableConcept (PZN) oder Reference(Medication) angegeben werden – aber genau eins."/> <expression value="medicationCodeableConcept.exists() xor medicationReference.exists()"/> <source value="https://fhir.hl7.at/elga/emed/r4/StructureDefinition/at-emed-mr-planeintrag"/> </constraint> </element> <element id="MedicationRequest.extension"> <path value="MedicationRequest.extension"/> <slicing> <discriminator> <type value="value"/> <path value="url"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> </element> <element id="MedicationRequest.extension:effectiveDosePeriod"> <path value="MedicationRequest.extension"/> <sliceName value="effectiveDosePeriod"/> <short value="Zeitraum, in dem die Medikation eingenommen werden soll."/> <definition value="Zeitraum, über den die Medikation eingenommen werden soll. Wenn mehrere dosageInstruction-Zeilen vorhanden sind (z. B. bei einer ausschleichenden Dosierung), entspricht dieser Zeitraum dem frühesten Startdatum und dem spätesten Enddatum der dosageInstructions."/> <min value="0"/> <max value="1"/> <type> <code value="Extension"/> <profile value="http://hl7.org/fhir/5.0/StructureDefinition/extension-MedicationRequest.effectiveDosePeriod"/> </type> </element> <element id="MedicationRequest.extension:renderedDosageInstruction"> <path value="MedicationRequest.extension"/> <sliceName value="renderedDosageInstruction"/> <short value="Vollständige Darstellung der Dosierungsanweisungen"/> <min value="0"/> <max value="1"/> <type> <code value="Extension"/> <profile value="http://hl7.org/fhir/5.0/StructureDefinition/extension-MedicationRequest.renderedDosageInstruction"/> </type> </element> <element id="MedicationRequest.extension:offLabelUse"> <path value="MedicationRequest.extension"/> <sliceName value="offLabelUse"/> <short value="Weist darauf hin, dass der verschreibende Arzt das Medikament wissentlich für eine Indikation, Altersgruppe, Dosierung oder Verabreichungsform verschrieben hat, die nicht von den Aufsichtsbehörden zugelassen ist und in der Verschreibungsinformation für das Produkt nicht erwähnt wird."/> <min value="0"/> <max value="1"/> <type> <code value="Extension"/> <profile value="https://profiles.ihe.net/PHARM/MPD/StructureDefinition/ihe-ext-offLabel"/> </type> </element> <element id="MedicationRequest.identifier"> <path value="MedicationRequest.identifier"/> <short value="Verwendung im Medikationsplaneintrag zu prüfen. Geplante-Abgabe-ID (e-Med-ID) steht erst zum Zeitpunkt der Erstellung einer geplanten Abgabe (Rezeptierung) zur Verfügung."/> <mustSupport value="true"/> </element> <element id="MedicationRequest.status"> <path value="MedicationRequest.status"/> <short value="Status des Medikationsplaneintrags (im Standardfall active oder complete): (req) active | on-hold | cancelled | completed | entered-in-error | stopped | draft | unknown -> entfernen: draft, unknown"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.statusReason"> <path value="MedicationRequest.statusReason"/> <short value="Grund für den aktuellen Status des Medikationsplaneintrags: (ex) https://hl7.org/fhir/R4/valueset-medicationrequest-status-reason.html. Verwendung prüfen."/> <max value="0"/> </element> <element id="MedicationRequest.intent"> <path value="MedicationRequest.intent"/> <short value="Der Medikationsplaneintrag stellt eine Anforderung und Ermächtigung zum Handeln durch den Antragsteller dar, daher ist intent immer "order". (req) proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option"/> <patternCode value="order"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.category"> <path value="MedicationRequest.category"/> <short value="Kategorie damit Medikationsplaneintrag von geplanter Abgabe unterschieden werden kann (beide haben intent order)"/> <min value="1"/> <max value="1"/> <patternCodeableConcept> <coding> <system value="https://fhir.hl7.at/elga/emed/r4/CodeSystem/MedicationRequestCategoryCS"/> <code value="1"/> </coding> </patternCodeableConcept> <mustSupport value="true"/> </element> <element id="MedicationRequest.priority"> <path value="MedicationRequest.priority"/> <short value="Priorität des Medikationsplaneintrag: (req) routine | urgent | asap | stat. Keine Verwendung in Medikationsplaneintrag."/> <max value="0"/> </element> <element id="MedicationRequest.doNotPerform"> <path value="MedicationRequest.doNotPerform"/> <short value="Gibt an, ob der Medikationsplaneintrag die Verordnung einer Medikation (und somit die Erstellung einer geplanten Abgabe) untersagt. Verwendung prüfen."/> <mustSupport value="true"/> </element> <element id="MedicationRequest.reported[x]"> <path value="MedicationRequest.reported[x]"/> <short value="Gibt an, ob dieser Datensatz als sekundärer „gemeldeter” Datensatz und nicht als ursprünglicher primärer Referenzdatensatz erfasst wurde. Er kann auch die Quelle der Meldung angeben. Keine Verwendung in Medikationsplaneintrag."/> <max value="0"/> </element> <element id="MedicationRequest.medication[x]"> <path value="MedicationRequest.medication[x]"/> <slicing> <discriminator> <type value="type"/> <path value="$this"/> </discriminator> <ordered value="false"/> <rules value="open"/> </slicing> <type> <code value="CodeableConcept"/> </type> <type> <code value="Reference"/> <targetProfile value="https://fhir.hl7.at/elga/emed/r4/StructureDefinition/at-emed-medication"/> </type> <mustSupport value="true"/> </element> <element id="MedicationRequest.medication[x]:medicationCodeableConcept"> <path value="MedicationRequest.medication[x]"/> <sliceName value="medicationCodeableConcept"/> <short value="Angabe mittels Pharmazentralnummer (PZN) aus der ASP-Liste."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <mustSupport value="true"/> <binding> <strength value="required"/> <valueSet value="https://termgit.elga.gv.at/CodeSystem/asp-liste"/> </binding> </element> <element id="MedicationRequest.medication[x]:medicationCodeableConcept.coding"> <path value="MedicationRequest.medication[x].coding"/> <min value="1"/> </element> <element id="MedicationRequest.medication[x]:medicationReference"> <path value="MedicationRequest.medication[x]"/> <sliceName value="medicationReference"/> <short value="Bei magistralen Anwendungen oder Infusionen ohne PZN."/> <min value="0"/> <max value="1"/> <type> <code value="Reference"/> <targetProfile value="https://fhir.hl7.at/elga/emed/r4/StructureDefinition/at-emed-medication"/> </type> <mustSupport value="true"/> </element> <element id="MedicationRequest.subject"> <path value="MedicationRequest.subject"/> <short value="Österreichischer Patient für den der Medikationsplaneintrag ausgestellt wird."/> <type> <code value="Reference"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-patient"/> </type> <mustSupport value="true"/> </element> <element id="MedicationRequest.encounter"> <path value="MedicationRequest.encounter"/> <short value="Aufenthalt/Begegnung, während dessen/der der Medikationsplaneintrag erstellt wurde. Verwendung im Medikationsplaneintrag prüfen."/> <max value="0"/> </element> <element id="MedicationRequest.supportingInformation"> <path value="MedicationRequest.supportingInformation"/> <short value="Zusätzliche Informationen (z. B. Größe und Gewicht des Patienten), die die Verschreibung des Medikaments unterstützen. Es müsste eigene Ressource verlinkt werden, daher keine Verwendung im Medikationsplaneintrag."/> <max value="0"/> </element> <element id="MedicationRequest.authoredOn"> <path value="MedicationRequest.authoredOn"/> <short value="Datum der Erstellung des Medikationsplaneintrags."/> <min value="1"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.requester"> <path value="MedicationRequest.requester"/> <short value="Der Arzt oder die Ärztin, die den Medikationsplaneintrag erstellt hat und für den Inhalt verantwortlich ist."/> <min value="1"/> <type> <code value="Reference"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-practitioner"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-practitionerRole"/> <targetProfile value="http://hl7.at/fhir/HL7ATCoreProfiles/4.0.1/StructureDefinition/at-core-organization"/> </type> <mustSupport value="true"/> </element> <element id="MedicationRequest.performer"> <path value="MedicationRequest.performer"/> <short value="Der gewünschte Ausführende der medikamentösen Behandlung (z. B. der Ausführende der Medikamentengabe). Keine Verwendung im Planeintrag."/> <max value="0"/> </element> <element id="MedicationRequest.performerType"> <path value="MedicationRequest.performerType"/> <short value="Rollen: https://hl7.org/fhir/R4/valueset-performer-role.html. Keine Verwendung im Planeintrag."/> <max value="0"/> </element> <element id="MedicationRequest.recorder"> <path value="MedicationRequest.recorder"/> <short value="Die Person, die den Medikationsplaneintrag im Auftrag eines GDA eingegeben hat. Keine Verwendung im Planeintrag."/> <max value="0"/> </element> <element id="MedicationRequest.reasonCode"> <path value="MedicationRequest.reasonCode"/> <short value="Grund für die Verordnung des Arzneimittels. Entweder Code oder Referenz (TODO: Evtl. Invariante)."/> <mustSupport value="true"/> </element> <element id="MedicationRequest.reasonCode.coding"> <path value="MedicationRequest.reasonCode.coding"/> <min value="1"/> </element> <element id="MedicationRequest.reasonReference"> <path value="MedicationRequest.reasonReference"/> <short value="Grund für die Verordnung des Arzneimittels. Entweder Code oder Referenz (TODO: Evtl. Invariante)."/> <mustSupport value="true"/> </element> <element id="MedicationRequest.instantiatesCanonical"> <path value="MedicationRequest.instantiatesCanonical"/> <short value="URL, die auf ein Protokoll, eine Richtlinie, eine Guideline oder eine andere Definition verweist, die von diesem Medikationsplaneintrag ganz oder teilweise eingehalten wird. TODO: Verwendung im Medikationsplaneintrag zu prüfen."/> <max value="1"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.instantiatesUri"> <path value="MedicationRequest.instantiatesUri"/> <short value="URL, die auf ein extern gepflegtes Protokoll, eine Richtlinie, eine Guideline oder eine andere Definition verweist, die von dieser Medikamentenanforderung ganz oder teilweise eingehalten wird. TODO: Verwendung im Medikationsplaneintrag zu prüfen."/> <max value="1"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.basedOn"> <path value="MedicationRequest.basedOn"/> <short value="TODO: Verwendung im Medikationsplaneintrag zu prüfen. Vermutlich nicht möglich, da keine versionsspezifischen Referenzen verwendet werden."/> <max value="0"/> </element> <element id="MedicationRequest.groupIdentifier"> <path value="MedicationRequest.groupIdentifier"/> <short value="TODO: Verwendung im Medikationsplaneintrag zu prüfen. Erst bei der geplanten Abgabe (Rezepterstellung) relevant. Evtl ein Verweis auf erstellte Rezepte? Würde Extension erfordern, da Kardinalität nur 0..1 zulässig"/> <max value="0"/> </element> <element id="MedicationRequest.courseOfTherapyType"> <path value="MedicationRequest.courseOfTherapyType"/> <short value="Gesamtmuster der Medikamentengabe (z.B. saisonal). Verwendung im Medikationsplaneintrag prüfen (dosageInstruction), paused soll im Status dokumentiert werden."/> <mustSupport value="true"/> </element> <element id="MedicationRequest.insurance"> <path value="MedicationRequest.insurance"/> <short value="Keine Verwendung im Medikationsplaneintrag."/> <max value="0"/> </element> <element id="MedicationRequest.note"> <path value="MedicationRequest.note"/> <short value="Zusätzliche Informationen zum Medikationsplaneintrag. TODO: zu prüfen im Kontext Korrekturvermerk"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.dosageInstruction"> <path value="MedicationRequest.dosageInstruction"/> <short value="Anweisungen zur Einnahme/Verabreichung des Arzneimittels. TODO: alle Elemente + R5 Extensions prüfen"/> <min value="1"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.dispenseRequest"> <path value="MedicationRequest.dispenseRequest"/> <short value="Details zur geplanten Abgabe des Arzneimittels im Medikationsplan. Keine Verwendung im Medikationsplaneintrag."/> <max value="0"/> </element> <element id="MedicationRequest.substitution"> <path value="MedicationRequest.substitution"/> <short value="Gibt an, ob eine Substitution Teil der Abgabe sein kann/sollte/nicht sein darf. Dieser Block erläutert die Absicht des Arztes, der den Medikationsplaneintrag erstellt. Wenn nichts angegeben ist, kann eine Substitution vorgenommen werden. TODO: Zu prüfen, ob Verwendung im Medikationsplaneintrag; Dokumentation über Substitution erfolg in der Dispense-Resource. Usecase: mit welchem Medikament der Patient das Medikament ersetzen kann. Hinweis: vor allem bei OTC Medikamenten sinnvoll, da keine geplante Abgabe dazu existiert"/> <mustSupport value="true"/> </element> <element id="MedicationRequest.priorPrescription"> <path value="MedicationRequest.priorPrescription"/> <short value="Im Falle einer Änderung wird auf den ersetzten Medikationsplaneintrag verwiesen."/> <mustSupport value="true"/> </element> <element id="MedicationRequest.detectedIssue"> <path value="MedicationRequest.detectedIssue"/> <short value="Bezeichnet ein tatsächliches/potenzielles klinisches Problem mit oder zwischen aktiven/vorgeschlagenen klinischen Maßnahmen für einen Patienten, z. B. Wechselwirkungen zwischen Medikamenten, doppelte Therapie, Dosierungswarnung usw. TODO: Es wäre eine eigene Ressource nötig, daher unrealistisch."/> <max value="0"/> </element> <element id="MedicationRequest.eventHistory"> <path value="MedicationRequest.eventHistory"/> <short value="Referenz auf Provenance-Ressourcen, die verschiedene relevante Versionen dieser Ressource dokumentieren. TODO: Verwendung im Medikationsplaneintrag zu prüfen."/> <max value="0"/> </element> </differential> </StructureDefinition>